Free Chlorine Water Test 0-6ppm (50 strips)

These Free Chlorine Water test strips combine a wide range of water quality detection with a patented Free Chlorine indicator.These test strips are EPA (Environmental Protection Agency, USA) approved, which means they are very reliable and accurate. These SenSafe® Free Chlorine Water Check test strips are available for compliance testing as described in the Federal Register (Vol 72, No. 47, Monday, March 12, 2007, p.11204, ITS Method D99-003) (applicable for USA). Designed to resist interference from monochloramines, Free Chlorine Water Check is the ideal product when testing water quality in a food processing environment as well as in environments where accurate and fast results are important.

• Simple Dip-Wait-Read Testing Method
• Test strips are stored in a plastic container to protect them
• Ideal for quick and reliable testing of water
• Accurate results are achieved in under one minute
• This product is safe and easy to use since there are no chemicals to mix, an MSDS is not required
• Low-cost option for regulatory compliance monitoring

These test strips are ideal in determining whether or not there is the correct amount of sanitiser present. The reagents are impregnated on the test strip pad, and no external chemicals are needed to perform the water quality test.

Suitable for: fresh water samples, including water from taps, wells, springs, boreholes, ponds as well as rain water as well as food processing environmentsDetection Levels: 0, 0.05, 0.1, 0.2, 0.4, 0.6, 0.8, 1.2, 1.5, 2, 2.6, 4, 6 ppm (mg/l)

Total Test Time: 40 seconds

Contains: 50 test strips, detailed instructions, colourchart, container for water sample

How to use:

1. Dip one strip into a 50ml water sample for 20 seconds with a constant, gentle back and forth motion.
2. Remove and shake once to remove excess water.
3. Wait 20 seconds then match to the colour chart. Complete colour matching within 1 minute.

Interferences: This test strip has no monochloramine interference below 4.0 ppm monochloramine concentration.

Please note: not suitable to test pool & spa water.

General description: For semi-quantitative determinations. Detection method: colorimetric. Fast, simply dip and read indicator paper. Consists of a plastic strip with attached sealed test paper. Compare colour change of test paper with fields of equal size on colour chart provided.

Please note: that this is a screening test and can not be used to certify water as safe or unsafe for drinking. This test kit provides approximate results ONLY when used in strict accordance with instructions. Watersafe expressly disclaims any liability resulting from the use of this product, failure to follow instructions, or reliance of test results. This is not a measuring instrument. Wash hands before and after use. Store in a cool, dry place and away from excess heat and direct sunlight. Keep away from children and pets. Avoid contact of test areas on strips with skin & eyes, do not ingest or expose to acids. Dispose of used tests responsibly.Made in USA